Mirror Chrome - Summer Sale

$ 565.00 USD $ 665.00

SKU: CHM09-HD

Conformable and flexible PVC material with silver coating. Suitable for car wrapping (or any other smooth or medium curved surface). Comes with a selection of 14 reflective colors to create the distinctive appearance and improve a car's aesthetics. We recommend using a steam vacuum or IRR heater for installation.

Thickness of film: 0,11mm

Thickness of film with release liner: 0,29mm

Type of film: Polymeric vinyl film (silver coating) with air release channels

Series: 180 series

Adhesive: Henkel solvent based moderate adhesive

Release liner: White silicone-coated paper with double-sided polyethylene coating

Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Indoor life: 4 years when followed rules of application and use

Outdoor life: 2 years when followed rules of application and use

Application: from +17°С to +25°С, usage from -35°С to +35°С

Dimensional stability: shrinkage less than 0,20%

Plastification: between 23%-31%

Package: Roll width 152 cm, length 18 m, weight 13 kg

 

How Much Wrap Do I Need?

Motorcycles 10-16 feet (3-5 meters)
Mini, small cars 42-45 feet (13-14 meters)
Convertible 49-52 feet (15-16 meters)
Coupe 55-59 feet (17-18 meters)
Sedan 55-59 feet (17-18 meters)
Hatchback 52-55 feet (16-17 meters)
Sports Car 52-55 feet (16-17 meters)
Station Wagon 59-65 feet (18-20 meters)
Sport-utility Vehicle (SUV) 55-63 feet (17-19 meters)
Minivan 65-80 feet (20-24 meters)
Pickup Truck 72-92 feet (22-28 meters)

Keep in mind that you may need extra material for repairs.
Therefore we recommend adding 6-9 feet (2-3 meters) to your measurements to avoid additional shipping expenses.

To achieve a perfect finish

  • We recommend using a tack reducer for flat panels.
  • Installation by at least two people/panel
  • Don't heat up to the line where the film is lifted to prevent adhesive lines.
  • Apply max 50 degrees of heat when stretching to prevent fading and marks.
  • Apply soap and water over the squeegee felt to avoid scratches.
  • Relax the film (heat and let it cool down) before applying it to a recess
  • Apply adhesive promoter on deep recesses
  • Post-heat a vinyl film to a recommended temperature

Important note:

The images, colours and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production lot number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One need to handle metallized films with care as the appearance of the metallized layer could change upon crumpling, overstretching, too strong heating. Film may scratch during application, or during day in and out use. Scratching of the film is not covered by warranty.