Neo Chrome vinyl wrap
With a collection of five stunning colors, TeckWrap offers you this series of neo chrome vinyl wrap, which gives your vehicle a gorgeous-looking finish, a perfect choice for partial wrapping. As a proud supplier, TeckWrap has plenty of film selections that have good conformability and durability.
Medium flexible chrome for decals and signs.
Package: Roll width 122 cm = 48" Wide
Designed for partial wrapping ONLY!
The thickness of film: 0.11mm
The thickness of film with release liner: 0.27mm
Type of film: PET film with new air release channels
Series: 180 series
Glue: Henkel solvent based moderate adhesive
Release liner: White silicone-coated paper with double-sided polyethylene coating
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: Up to 3 years when followed rules of application and use
Outdoor life: Up to 1-2 years when followed rules of application and use
Application: from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One need to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during application, or during a day in and out use. Scratching of the film is not covered by warranty.
Сaution: Before purchasing and using, a customer shall determine the suitability of the product for its intended use and should have experience in wrapping metalized films. Current film has limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend laminating chrome films. We recommend using a steam vacuum or IRR heater for installation. The dry application only. Chrome films (CHMxxE, HCHxxG, MCHxx) can leave up to 30% adhesive residue. We recommend not heat film during uninstall. Please refer to TeckWrap Installation Guide for additional information.